Our Classified Ads are a service to Whidbey Weavers Guild members and the weaving community in Washington state. The ads are for selling non-commercial weaving and spinning equipment, books, and fiber that are located in Washington.
To place an ad, please provide one or two photos in jpg format, a brief description, price, where the item is located, and contact information via email to Janis. The ads will be posted for six months.
The transaction is between the seller and the buyer, the content of any advertisements on this website and any transactions are solely the responsibility of the advertiser and not Whidbey Weavers Guild.
Important Information on Scammers
Please be aware that there are scammers who may respond to your ad. Don’t let that stop you from advertising, it isn’t hard to determine if a buyer is legitimate. If you need help email Janis. Check these Links for more details:
14yd Schacht Warping Board with Poles
Purchased in 2008, this board has been gently used with no damage (pegs have always been tightly intact). The custom poles allow the board to be used without mounting to a wall, as they lean against the wall and are portable.
They are a clone of Paula’s Purple Poles with [a] holes to hang/tie the assembled warping board either lengthwise or crosswise; and [b] longer bolts/wing nuts to secure the board to the poles (the original bolts from Schacht are also included). Click here to view Paula’s Poles.
The poles are padded at the top to protect the wall, and if placed on hardwood flooring, “Super Sliders” (not included) can be placed at the bottom of the poles. The poles will not move during the warping process.
The 14-yard warping board sells new for $177 and the Purple Poles sell new for $80 – asking $100 for the board and poles together. Located in Anacortes. Email Patricia for more information.
6-21-2026
Varpapuu Finlandia Loom
~~ countermarch loom, made of Finnish birch
~~ the are dimensions 49”D x 73”W x 62”H, the weaving width is 58”
~~ set up for 8 harness /10 treadles, but also includes all the parts needed to expand to 12 harnesses, 12 treadles.
~~ adjustable bench
~~ 6 & 10 dent reeds
~~ lease sticks, harness holders
~~ There is Texsolv tie up throughout, and original linen aprons are in excellent condition.
Price: $1300 obo
Pickup in Port Angeles. Email Julianne for more information.
3-24-2026
Studio of Handcrafts Loom
This is the text from the original flyer:
From the Studio of Handcrafts flyer… jack- type loom is constructed of red oak with hand rubbed oil finish… The ease of the treadle tie up is a feature everyone greatly appreciates…The patented Lamm to treadle connectors need only be threaded into the right holes… The breast beam and the entire beater assembly just lift off and are out of the way for threading…All of the harnesses slide out of the castle grooves with nothing to detach…The heddles can easily be shifted without using tools or opening hooks.
Standard features of studio of handcrafts looms:
Heddles – 10 to 1 inch
Reed – one to 10 dent
12 inch circumference warp beam
Friction brake on a warp beam
Small increment ratchet on cloth beam
Six treadles for four harnesses
Price: $350
Located in Coupeville WA, contact Natalie for details.
2-15-2026
Elegant Older Counterbalance 4-shaft Loom
Counterbalance Loom has 4 shafts with adjustable bench. Handmade from instructions in “Foot-Powered Looms” by Edward Worst.
33″ wide and 36″ front to back, 28″ weaving width, 200 texsolv heddles per shaft, and front-hinged treadles. Advancing the warp requires weaver to rise to loosen warp tension cog near back.
Price: $325. Located near Langley on Whidbey Island
Contact: Molly
9/3/2026
Vintage Fricke
Spinning Wheel
This double-treadle maple spinning wheel is likely an earlier S-152-era version. It has a desirable hardwood rim-and-spoke drive wheel and Hi-Speed option. The wheel works well and has very smooth action.
Includes flyer, four Fricke bobbins, three-bobbin/three-peg Lazy Kate (currently disassembled), spare clear drive-band material/bands, yarn-guide and tension hardware, adjustment keys, and miscellaneous original hardware. No stamped model number; identification is based on construction and documented Fricke features.
Price: $550 obo.
Pick-up in Mill Creek, WA only
Contact Yuriy
9/3/2026
REEDS
Each reed 4 feet long. New they cost about $230 each. Red is 8 dents/inch. Blue Toika is 12 dents/inch. Practically new and well-cared for but need a new home.
Price: $75 for each one. Pick-up near Langley on Whidbey Island.
Contact: Molly
9/3/2026
Harrisville Designs Model A4 Floor Loom
Selling my 2-year-old Harrisville Designs Model A4 22″ floor loom, to upgrade to an 8-shaft loom.
~~ 22″ weaving width, 4 harnesses, 6 treadles. Folds easily for storage or transport even when fully warped.
~~ Full 5-Reed Stainless Steel Production Library: Includes sizes 6, 8, 10, 12, and 15 dents.
~~ Official Harrisville Floor Loom Raddle
~~ Official Harrisville Loom Tool Tray: Convenient overhead wood catch-all for your shuttles, threading hooks, and scissors
~~ 200 Extra Large Eye Wire Heddles (600 Total): Upgraded from the standard 400 package to allow for high-density warp designs, fine thread threading patterns, or intricate structural weaves without purchasing extra hardware.
The loom is in excellent condition throughout. The solid wood frame is smooth, clean, and free of defects. Harness cables replaced early 2026. Kept exclusively in a climate-controlled, smoke-free home studio environment.
Price: $1800 Cash
Available for local pickup in the Auburn WA area. The compact design allows it to fit easily into most standard hatchbacks, SUVs, or crossovers.
Email for further information. Thank you!
7-27-2026
Custom Spinning Wheel
This fine custom spinning wheel made by John Westlake of Eugene, Oregon, is made from Oregon myrtle wood. It is a double treadle with a built-in lazy kate.
Included are:
~~ eight matching myrtle wood bobbins
~~ 3 whorls each with two ratios
~~ a wooden handled threading hook
~~ Allen wrenches and other small tools.
Price: $1400
Local pick-up only in Clinton, Washington. Please email for more information.
7-17-2026
AVL Warping Wheel – Price Change
Make sectional warping fun, fast, and efficient with this ultimate sectional warping tool. It is in excellent condition and works like a charm! The detail photo on the right is the yardage counter.
Price: $300 (Price for a new wheel from AVL is $941.25.)
Email Pam for more information. The wheel is located in Anacortes, WA.
7-30-2026
